Tenda TEG1124P-24-250W 24-Port Gigabit Rackmount PoE Switch

Tenda TEG1124P-24-250W is a PoE Switch that offers 24 10/100/1000 Mbps Base-TX RJ45 ports. Ports 1-24 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3 at standard (maximum PoE power output: 30 W). The switch offers a maximum PoE power output of 225 W and can supply power to and exchange data with APs, IP cameras, and IP phones through CAT5 cables. Additionally, it also provides simple management modes such as CCTV, VLAN, and Isolation to help reduce cabling costs of IP terminals like APs and IP cameras.

6KV LIGHTNING PROTECTION POE SWITCH IS THE ONLY ENGINEERING SWITCH

In real projects, APs and cameras are recommended to be installed outdoors or at an elevated location. As a result, it increases the chance of lightning strikes on cameras and PoE-powered switches. Tenda Tenda TEG1124P-24-250W series switches have a professional lightning protection design – 6KV Lightning Protection for Ports and the power, and they have two levels of protection design respectively, which effectively suppress the lightning current from the network cable and power supply, equivalent to adding a security wall to the entire network monitoring system. The test standard is much higher than the national CCCrequest. Therefore, in a thunderstorm, Tenda TEG11 series switches, can also provide a stable and reliable service to the surveillance network. Therefore, it guarantees the normal transmission of the picture.

CCTV, STANDARD, VLAN AND ISOLATION OPERATION MODES OFFERED

• CCTV –

  In this mode, the port cache is optimized. PoE ports 1-8 have higher priorities over the other ports. Therefore, all the ports of the switch can communicate with each other. Connect the uplink port of the switch to the upstream device to which the monitoring computer connects. This ensures smoother monitoring video playback.

• STANDARD –

  The switch functions as a common unmanaged switch. All the ports of the switch can communicate with each other.

• VLAN –

  Ports 1 to 22 of TEG1124P-24-250W are isolated from each other. But these can communicate with ports 23 and 24 (uplink ports) respectively. Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing.

• ISOLATION –

  Ports 1 to 12 and Ports 13 to 24 of TEG1124P-24-250W belong to two different VLAN. This mode isolates supervision network and wireless network to make them not interfere with each other.

250W POE POWER SUPPLY SIMPLIFIED WIRING

Ports 1-24 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers a maximum PoE power output of 250W. Whereas each port offers a maximum PoE power output of 30 W. The ports supply power to and exchange data with APs and IP cameras.